Wet Suits



             


Thursday, January 29, 2009

What to Do with Your Triathlon Wetsuits During the Race

Due to time pressure, majority of racers often forget that one of the central things in a race is for your gears to fit properly. When its too tight, then it must have the proper fit, right? Yes.

There are no standard measures that can help us in choosing our wetsuits. We only have to trust on our best judgement and trust on the luck that you have the perfect wet suit.

Triathlon races allow absolute personal choices for gears and equipments. However if you were joined in a racing team, it would be possible that you get to follow the prescribed uniform.

Wetsuits are critical during the race. If they aren't perfectly donned, they can create true differences. In most cases, they restrict your from moving freely just because the lower suit pulls the top from its proper place.

Wetsuits are designed to be pulled easily into and out from your body, especially when you and the suit are wet.

It is best to leave your socks on if you are to wear the wetsuit. This will prevent the material from stretching due to pulling from your toes. Pull the bottom of the pants further until the crotch is snugly fit. This junction is critical so please do it carefully.

If you are using a full-length wetsuit, you have to ensure that the dividing section between the lower and upper parts are placed on their respective positions.

Afterwhich, drive your arms into the armholes. Secure to it that the space between your armpit and the suit is just enough to let you move if you are using full suits. If however, you prefer to use Long Johns, you would no longer be bothered with the sleeves.

Now the question arises, which works better, Full Suits or Long Johns?

If it is the advantage of speed that you like, you can turn to full suits. These work well for more experienced swimmers who can produce long but lesser strokes since full suits help conserve energy by cutting the water easier.

Long Johns however, leave your arms free which can better help facilitate higher stroke counts. These also provide the feel of water.

If you have practiced enough, it is possible for you to wear or remove your wetsuit in less that 10 seconds during the race. After all, triathlon wet suits are designed to be taken in and off quickly. But whatever you do, never sit down while taking it off. This will add 5 seconds or more on your transition time.

This content is provided by Low Jeremy and may be used only in its entirety with all links included. For more info on Triathlons, please visit http://triathlon.articlekeep.com

Labels: , , , , ,

Friday, January 16, 2009

Surfing Wetsuits 101 - How To Pick The Best Wetsuits For Surfing

Winter is a fact of life for many people who enjoy the sport of surfing. However, cold air and water temperatures don't have to stop your sessions! Enter the wetsuit, probably the single biggest invention in surfing since the surfboard itself.

Wetsuits are tight fitting bodysuits made of flexible neoprene rubber. They work by trapping a thin layer of water between the neoprene and the skin. The body heats up this water, thus keeping the surfer warm.

When picking out a suit, you're going to want to get one that is specifically designed for surfing. That means seeking out your local surf shop. Don't go to a dive shop or swimming store. Surfing wetsuits are specially made to endure the specific repetitive motions that surfers make when they're out in the ocean. For example, non-surfing suits can have seams in bad places that will cause major rashes when you've been paddling for a few hours.

Wetsuits come in different cuts, from short-sleeve spring suits (or shorties) to fullsuits with hoods. When it gets very cold, booties and gloves are also available. Caps and hoods are also available for suits that don't have them already attached.

Surfers often have a quiver of wetsuits to accompany their quiver of different boards, especially in areas where the seasons change dramatically.

There are a variety of thicknesses from which to choose. From thin 2 mm spring suits, to 2/3 mm fullsuits, 4/3's, 5/4/3's, and 6/5/4's. These numbers reference how thick the neoprene is in millimeters for different areas of the suit. Often the thickest neoprene will be in the torso and thighs, while the thinner areas will be on the arms and calves.

When getting a wetsuit, it's important to set aside a block of time in order to try them on. Each company uses different models and they all have a slightly different fit.

The fit should be snug. Don't buy them too loose or water will be able to freely enter the suit and the insulating effect will be lost. This means you shouldn't buy a kid's suit a few sizes too big so they can grow into it. They might as well not wear a suit at all. The neck is an important area to pay attention to. The collar should be snug so that water doesn't freely enter and exit.

When looking at the pricetag, you do tend to get what you pay for. There are several different makes and models from each company, from budget to luxury. Often the higher priced wetsuits will have all sorts of cool things like sealed seams and improved zippers and entry/exit schemes.

Hayley Gordon is an avid surfer. For more information on wetsuits, go to http://www.surfinghandbook.com/wetsuit.html

Labels: , , , , ,